Maytag Refrigerator Water Filter
|
Available in different models and types, Maytag water filters have been proven to lessen sediments, heavy metals like lead, chlorine, unpleasant odors and tastes, and cysts like giardia and cryptosporidium found in water.
If you want to buy a Maytag refrigerator pure water filter then all you have to do is look into the model of refrigerator unit first.
One of the recommended water filter models from Maytag that you can get is the UKF7003AXX PuriClean model
.It fits Maytag refrigerators that come with a screw-in round filter that can be found over the top shelf inside your ref's compartment.
This model meets the standards 42 set by ANSI and NSF when it comes to the lessening of the odor and taste of chlorine and class I particulates in water. In fact, it has been noted to get rid of more than 75 percent of chlorine and over 85 percent of class I particulates.
When it comes to the lessening of turbidity, lead and cysts from water, the filter model has also met ANSI and NSF standards 53. The cyst reduction of this model has registered to as much as 99.9 percent.
Like most water filters for refrigerators, this Porcelain water filter model also retains the fluoride component in your drinking water, which ensures its healthiness.
This model is recommended for replacement within six to nine months or during the time when you will already notice an unpleasant odor or taste in your water. However, there is a also a light on this Maytag water filter, which will come on if it needs to be replaced.
Another popular Maytag refrigerator water filter is the PuriClean II model
number UKF8001AXX. It fits Maytag as well as Amana refrigerators that come with narrow and long filters that are set on a "trough" that comes down from the refs' ceiling. As with most Maytag water filters, this model works at reducing the contaminants from water without changing the fluoride content.Replacing A Maytag Refrigerator Water Filter
There are different ways by which you can replace Maytag refrigerator water filters, depending on the model that you have bought. For the screw-in round filter, all you have to do to start the process of replacing it is to give the old filter a quarter counterclockwise turn before pulling it down and out.After this, the new filter should be pushed up into its slot until it stops. Then, you need to give the new filter a clockwise quarter turn to secure it more firmly in place.
For the narrow and long Maytag refrigerator pure water filter, you need to open the plastic cover of the filter first, so you can get to see the filter. After this, you follow the steps that you did with the round filter.
Once you have done the last step, you should then shift the plastic cover of the filter up until such time that you can hear it snap, which means that it has already been closed firmly.
After you have changed your water filter, you should then reset your change filter light. To do this, just press on your water dispenser's lock and auto light buttons for four seconds, both at the same time. Make sure the status indicator light of the filter starts flashing before your release on your hold.
Related article: LG Water Filters - Your Refrigerator's Best Friend
Back from Maytag to Refrigerator Water Filters
Back from Maytag Refrigerator Water Filter to All Water Purification
Sitemap - Water Softeners | Sitemap 2 - Water Purifiers | Sitemap 3 - Water Filters | Sitemap 4 - Water Treatment | Privacy Policy | Advertising and Disclosures | Contact | Copyright © 2006-2012 AllWaterPurification.com | All Rights Reserved | All trademarks used are properties of their respective owners
 |
||
|
||
 |
|
||
|
||
|
|
||
|
||
|
|
||
|
||
|
|
||
|
||
|
|
|
|
|
|
    |
